Steel structure manufacturer: How about introducing steel structure engineering?


Release time:

2023-02-06

Steel structure manufacturer: How about introducing steel structure engineering? The selection of materials for steel structures is combined with the operation cost, and suitable raw materials are matched according to different market demands. If the regional environmental pollution is becoming more and more serious, the raw materials for roof enclosure structure should be combined with low-end plates to ensure the operation cost used in the middle and later periods.

Steel structure manufacturer: How about introducing steel structure engineering?
The steel structure is mainly composed of building steel, mainly composed of steel columns, steel beams, seamless steel pipes, etc. Their core is generally connected by electric welding, anchor bolts, bolts, etc., which is a major architectural structure. It has the characteristics of light weight and simple construction, and is widely used in large and medium-sized projects.

The selection of materials for steel structures is combined with the operation cost, and suitable raw materials are matched according to different market demands. If the regional environmental pollution is becoming more and more serious, the raw materials for roof enclosure structure should be combined with low-end plates to ensure the operation cost used in the middle and later periods.
The lifting of steel structure shall follow the construction process of "center to center to rear column, rear column beam, first down to top". Assemble a relatively stable frame system in the middle of the house, and then push it to both sides to symmetrically assemble the remaining steel beams and columns.
In order to ensure the comprehensiveness of the engineering buildings, the engineering buildings can be more personalized and convenient for the next stage of design and construction, and create a steel structure project combining technology and decorative art.
Features: high commodity prefabrication rate, low project cost and short construction period.
In the steel structure engineering, the unified discrete coefficient and the unremitting mass production have improved the practical level of the construction industrialization. The initial manufacturing of steel structure integrates the manufacturing and installation of raw materials, which can reduce the cost of infrastructure projects, promote the rate of capital construction, and shorten the development cycle by about 40%.
Secondly, steel structure can meet the needs of high and large span structures.
Symmetrical steel structure, close to various homogeneous bodies, has high tensile strength and high toughness. Compared with laminated glass, concrete and wood, its density must be much lower. Under the same pressure environment, the net weight of the steel structure is small, and it can be made into a large span structure, large overall width, and large relative height.
Raw materials can be recycled, which is conducive to the protection of ecological environment and the concept of sustainable development.
Construction steel is a kind of raw material with high toughness, high wear resistance and strong recycling value. Edge steel can be recycled without abrasive tools.
When the steel structure is used, the copper products shall be warmed first, and then the die castings shall be warmed to ensure that the weldments are symmetrical when exposed to heat. Electric welding of steel structure shall be carried out in medium temperature and large and medium natural environment. Under the flat tube, it is more suitable for application. Pay attention to the correct operation steps and ordinary routine maintenance during use.
Steel structure manufacturer: steel structure will have the following problems during planning and construction
1. If the structure contains eaves gutter, the tie bar cannot be close to the top, otherwise the drainage pipe cannot be installed, which will also cause problems.
2. The position of high-strength bolts in the steel structure should be scientific and there should be room for tightening. If you can, try to choose a plan that is symmetrical from top to bottom, and the effect will be better.
3. The layout of steel purlins should be carefully checked with the construction drawing of steel beams to prevent the problem of inconsistent total number.
4. Pay attention to whether there are stiffening ribs in the gusset plate to prevent deformation during electric welding.
5. The type of materials used should be avoided as much as possible, because the cost should be understood.
Steel structure manufacturer: If you need the installation and construction services of steel structure, please consult our steel structure manufacturer.